通知公告更多
科研成果

Improvements in farmland surface roughness measurement by employing a new laser scanner

发布时间:2015-01-15|| 【关闭窗口】

Zheng Xingming, Zhao Kai, Li Xiaojie, Li Yangyang, Ren Jianhua. Soil & Tillage Research/143 (2014) 137–144.

Abstract:Farmland surface roughness is related to the surface root mean square height (rmsh) and surface correlation length (cl), and it is not only an important factor influencing wind and water erosion but also an input parameter for modeling radar backscattering coefficients and the passive microwave brightness temperature. Although these surface roughness parameters are important for soil erosion estimation and land surface parameter retrieval from microwave remote sensing data, their measurement accuracy is limited by the measurement method, instruments used and data preprocessing. To obtain high-precision surface roughness measurements, a laser scanner with spatial measuring range of 400 mm _ 600 mm is used to measure the surface height of four test sites with different surface roughness. Based on the surface height data measured using the laser scanner, the effect of segment number on the surface roughness accuracy is analyzed using the random sampling method. The results show that the measurement uncertainties rmshm and clm decrease with increasing segment number. Among all four test sites, 80% and 90% accuracies can be achieved for rmshm and clm, respectively. In addition, the required segment number for the same clm accuracy is found to be related to the degree of surface roughness, but this conclusion does not hold for rmshm. In summary, the accuracy of the surface roughness measured by the laser scanner is greater than 80%, and this scanner is very suitable for field measurements due to its ease of operability and mobility

Keywards:Surface roughness Root mean square height Correlation length Laser scanner

附件
相关文档
版权所有 中国科学院长春净月潭遥感实验站
联系地址:长春市高新北区盛北大街4888号 邮编:130102
联系电话:0431-85542227 邮箱:jyrs@iga.ac.cn